Fall 2025, Summer 2026Project

StoryPhone MK-II

My very best friend has a 4-year-old son, and so I decided to go thrifting to find another old rotary phone to convert into a story phone for him. As this is a second pass at my original StoryPhone, this isn't a well-documented project, but I did have to replace the handset rocker switch as it promptly broke once I handed the phone over, and fixing that was enough fuss to warrant a post here.

You can actually see the clear cover popped off in this video, and I assumed the humble Zip Tie would fix everything! Another reminder that anything that doesn't seem perfect will break on you in the wild.

The Build - Things I did differently

Some lessons learned from the first attempt - I used a 12VDC supply this time, and a cheap buck converter to bring it down to 5V - this spared me the more expensive VERTER for power filtering. I 3D printed bases for all the boards to make them easy to secure and compact inside the phone. Also, given that the original rocker switch was flaky, I decided to install a relay instead of directly flowing power through it to minimize any further degradation.

TheBuild

TheBuild

Fixing the rocker switch

As mentioned above, after a few great weeks, my friends mentioned that the phone no longer recognized when it was hung up, so it had to be unplugged - the switch had failed.

I finally visited them again and was able to bring it back with me for repairs - sure enough there was poor contact on the original switch, so sometimes it worked, sometimes it didn't. Instead of attempting a lengthy restoration and risking deferring the problem, I decided to strip out the switch and put an arcade button in there instead.

ArcadeSwitch

I don't really want to talk about this part, but I will, because integrity. It was so much more trial and error than I'd expected to align the button, and 3D print a presser that fit into the original rocker and perfectly pressed the button when the rocker was down.

Attempts

Let's just say I got lost in the weeds a bit, and by the time I had a beautiful mechanical solution, I'd lost track of the mechanical reality - when the phone is assembled and the handset on the cradle, it doesn't actually swing the rocker assembly back all the way - so I had to enlengthen my presser. THEN, to rub salt in the wound, I learned the spring in the arcade switch is stronger than the rocker, so unless you press the handset down (or make it heavier), the button still won't press.

It was about this time that I decided to try a lighter-duty switch. I grabbed one of these from my box and with some of the same fiddling it worked much better.

NewSwitch

Here's everything together - mechanically strapped and then glue-gunned to heck.

NewSwitch     NewSwitch

NewSwitch     NewSwitch

I got to creatively re-use one of my 3D prints to get the button press perfectly aligned with the handset on the cradle.

Delengthened

My lingering concern is how long this new switch will last, but that's worth finding out too, so I'm sending it.

Shopping List