Spring 2023Project

Cursive Neon Sign

This project was my first serious use of my newly acquired 3D printer, and a lot of fun. As a birthday gift to my cousin and a challenge for myself, I wanted to make her a light-up sign of her name, with addressable neon lights.

My plan was to generate an SVG file of her name in cursive using the Inkscape app, and load it into Tinkercad as a cutout - basically making a channel for me to insert neon NeoPixel strips.

What I knew I wanted from the start was for this to have a flat face - to look like a black rectangle until the lights come on. I'd done some experiments in the past, and found that light will shine through a single layer of 3D print decently, so that was my starting place.

Step 1 - Find a font

Easier said than done! I used Google Fonts and worked through dozens before I started to realize there were none that felt right for this application - there'd be serifs, or curls, which would be challenging to light up nicely. I started Googling how CNC users build text, and discovered Hershey Text, a core plugin already in Inkscape. I then found this guide which helped put it all together. Basically, you write the text you want using the regular text tool, select the text object, and then go to Extensions > Text > Hershey Text and select the path font you want to convert it to. I went with "Hershey Script 1-stroke".

I played around with it a lot from there - adjusting the sizing, setting the path width to try to align with the width of the neon strip, and some small tweaks to the paths to keep the job cleaner and simpler. I removed the dot of the i, for example, because I decided I'd use a 5mm NeoPixel LED instead, and could add that directly to the print.

HersheyTextWithTweaks

Step 2 - Model and Print

Now that I had an SVG with the path, I could import that as a shape into Tinkercad. This was a TON of trial-and-error to get dialed in, but the basic idea was to have two copies of the script, one a little larger than the other, and subtract the smaller from the larger to leave a channel for the NeoPixel strip. This was so I wasn't wasting tons of filament and time printing a solid 10mm thick square with just the script channeled out of it. To make testing faster, I was working on the full final shape, but would hide all but the first letter to actually print and test with.

ImportingIntoTinkercad

Once I felt like I had everything dialed in the way I needed, I committed to the final full print.

FullPrint

Step 3 - Assembly

While this step took forever, there's not much to document. I slowly snipped, wired, shimmed, and glued each piece of neon NeoPixel strip into the channels, testing along the way to ensure everything was working. As NeoPixels communicate in series, I did my best to wire everything in a cursive flow, and took time to capture the specific pixel numbers around each letter and intersection for future animation.

PuttingItAllTogether     PuttingItAllTogether

I think it's looking pretty good! A little rough around the edges, but once it's in a light-blocking enclosure, less background light will highlight the spots where the neon missed.

PuttingItAllTogether

Step 4 - Have Significant Doubts

Back when I was font-hunting, and seeing that most fonts don't translate well to a single, continuous path, I had a thought about my approach - what if I printed the font, any font, and had a NeoPixel matrix as a backlight?

While I was pleased with how things were looking on the neon NeoPixel strip channel, the lack of "perfection" was starting to eat at me a bit.

HurtsMe

I decided to pause the strip build, and try the backlight idea to see how I felt about it in real life.

ImportingIntoTinkercad

This approach works too! Pros and cons to each. Felt like a bit of a waste of a matrix to only use a small portion of it, and the animations would be more limited as no lights would be truly aligned with the font. Time to look at them side by side.

I felt stumped, both had their advantages. Whether it was sunk-cost bias, being a glutton for punishment, or wanting to give a gift that clearly had a lot of careful work put into it, I decided to scrap the backlighting approach and stay with the neon NeoPixel strips.

Step 5 - Finish the Build

I designed this to fit together as two pieces - the front, shallow to let me work on all the lighting, and the back enclosure for the controller and to provide a bit of depth.

Controller     GlueGun4Life

I hand-coded a bunch of animations that look like the letters are being drawn, and added a simple button on the back to toggle between animations. I played around with storage options, so the controller would remember which animation it was last set to on boot. This was a little trickier than expected on a Raspberry Pi Pico, but this guide helped.

Out in the World

Hard to believe it's been over 3 years now - I half expected the sign to either pull itself apart or get smashed within a month, but it's still going strong!

It's seen a few tweaks over the years, including a wall-mount version, and the addition of a brightness dial. Cordie still uses it as a nightlight, so I also built a sleep function that shuts it off after 90 minutes without any button presses.

Mesmerizing!