Spring 2023Project

Cat Waterer

I believe by now you know I have a cat, and I like to make things to spoil said cat. In my defence, cats (male cats especially) can be bad at drinking enough water. They like fresh, running water. My guy loves the sink, and is pretty meh towards his water bowl. I'd tried fountains over the years, but they get gross fast, and he tended just to play with them and make a giant mess.

I'm lucky enough to have a second bathroom, and so I decided to build something to open the sink tap just a little bit when he jumps up on the counter, and close it after he leaves.

The Build

I had an extra Particle Argon, which is a Feather-format, WiFi-connected board. It felt perfect for this application, since I could adjust parameters live (for example, over time the tap may not let out as much water, and so the angle needs adjustment) and log usage data.

I also had experience using the VL53L1X sensor for optical distance ranging. I did play with a few sensor approaches, like a heat sensor and a motion sensor, but they weren't consistent enough at confirming "cat present" anywhere on the counter for any period of time. While a photo-beam isn't perfect either, it seems to work consistently enough. I bought a slightly cheaper variant of the SparkFun sensor breakout from RobotShop (linked below).

Finally, I made use of an old servo to actually open and close the tap. Some custom 3D prints and a custom Feather adapter board later, and everything came together.

CatWatererHardware

Everything can be removed from the sink easily, and when guests come over, I can just flip the arm up so the faucet is once again free.

CatWatererBuild     ServoMount

CatWatererFaucetAttachment

Testing

Now, everything up to this point was all well and good technically, but would my fella use it? Would he just sit for hours watching precious water flow? The only way to know for sure was to set up a camera and watch the logs. Sure enough, it was an instant hit.

CatWatererInAction

Data Logging

Instead of paying for Particle's data logging, I set up a really simple data capture script on my web hosting. In the Particle Console, I set up a Webhook Integration to capture all "log" events from the device and point the data at my "capture.php" URL, where it appends the data it receives to a simple text file. That file can then be loaded into Excel for number crunching.

CatWatererInExcel

I processed a couple years of data in Summer 2025, and now I know he drinks for an average of 1 minute and 34 seconds per visit, and he visits about 5.4 times per day. Hydration is key!

3D Models

   

Links & Shopping List